regression-tests issueshttps://gitlab.psi.ch/OPAL/regression-tests/-/issues2019-02-15T08:51:23+01:00https://gitlab.psi.ch/OPAL/regression-tests/-/issues/51opalimpact-1 failing after replacing OFFSETZ with ZSTART2019-02-15T08:51:23+01:00snuverink_jjochem.snuverink@psi.chopalimpact-1 failing after replacing OFFSETZ with ZSTARTSince we discussed to get the regression tests working, I had a more detailed look at one of them.
After replacing `OFFSETZ` with `ZSTART` in commit e2e902d8 the opalimpact-1 test is failing.
I believe this is because the starting s po...Since we discussed to get the regression tests working, I had a more detailed look at one of them.
After replacing `OFFSETZ` with `ZSTART` in commit e2e902d8 the opalimpact-1 test is failing.
I believe this is because the starting s position is different in both cases, perhaps contrary to what one would expect(?).
In the reference .stat file there is (t,s):
```
1.000000000000000e+00 1.383007003378306e-02
2.000000000000001e+00 2.766014006756613e-02
```
So the reference starts at t=0.0, s=0.0
and the current version (t,z):
```
2.115406793793548e+00 2.883007003378255e-02
3.115406793793549e+00 4.266014006756509e-02
```
The current version starts at t=0.11 , s = 0.15 (value of `ZSTART`).
since the test has `ZSTOP = 1.0` the last line will be different and the test will fail.
One possible way to fix the test is to have `ZSTOP=1.15`.
I haven't checked the other tests that were changed in the same way, but these might also be affected in the same way.kraussnuverink_jjochem.snuverink@psi.chkraushttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/50some regression-tests use removed keyword DEBIN2019-02-15T08:51:23+01:00adelmannsome regression-tests use removed keyword DEBINDEBIN was removed from the DISTRIBUTION **BUT** the regressiontests are **NOT** updated. We should avoid this ....
Sorry was not able to find out who did this ....DEBIN was removed from the DISTRIBUTION **BUT** the regressiontests are **NOT** updated. We should avoid this ....
Sorry was not able to find out who did this ....https://gitlab.psi.ch/OPAL/regression-tests/-/issues/49Remake correct references after using P0 as momentum for reference particle2018-03-26T10:04:16+02:00snuverink_jjochem.snuverink@psi.chRemake correct references after using P0 as momentum for reference particleAfter commit [14df35e](https://gitlab.psi.ch/OPAL/src/commit/14df35ee805b6add1a1ef153ef39e1128d3aa3a4) more regression tests (in master) fail (from 94 to 39 passed). The reference files need to be remade.After commit [14df35e](https://gitlab.psi.ch/OPAL/src/commit/14df35ee805b6add1a1ef153ef39e1128d3aa3a4) more regression tests (in master) fail (from 94 to 39 passed). The reference files need to be remade.krauskraushttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/48Remake correct references for those tests that are affected by the Hz -> MHz ...2017-10-27T13:49:42+02:00krausRemake correct references for those tests that are affected by the Hz -> MHz changethe references of some tests, e.g. EGunCTF3-1, have changed with 1a282f4c and are *wrong*.the references of some tests, e.g. EGunCTF3-1, have changed with 1a282f4c and are *wrong*.adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/47Fix units of BFREQ / BCURRENT2019-02-15T08:51:23+01:00krausFix units of BFREQ / BCURRENTIn the following tests it is unclear whether the units for BFREQ and BCURRENT are correct
Degrader-1
Distribution-Binomial-1
Distribution-Gauss-1
Distribution-Gauss-2
EGunCTF3-1
EGunCTF3-2
ExternalFieldTest
LaserEmission-1
OpalRi...In the following tests it is unclear whether the units for BFREQ and BCURRENT are correct
Degrader-1
Distribution-Binomial-1
Distribution-Gauss-1
Distribution-Gauss-2
EGunCTF3-1
EGunCTF3-2
ExternalFieldTest
LaserEmission-1
OpalRingTest
ParallelPlateFurman1
ParallelPlateVaughan1
PSIGUN-1
RestartTest-1
RestartTest-2
RestartTest-3
RestartTest-4
RestartTest-5
RestartTest-6
RestartTest-7
RestartTest-8
RingCyclotron
RingCyclotronMatched
RingCyclotronMTS
RingCyclotronSingleParticle
Scan-1adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/45RegressionTests not running anymore after commit to src2017-12-08T14:51:58+01:00snuverink_jjochem.snuverink@psi.chRegressionTests not running anymore after commit to srcThe [regression tests site](http://amas.web.psi.ch/opal/regressionTests/master/) has no recent reports despite [recent commits to master](https://gitlab.psi.ch/OPAL/src/commits/master)The [regression tests site](http://amas.web.psi.ch/opal/regressionTests/master/) has no recent reports despite [recent commits to master](https://gitlab.psi.ch/OPAL/src/commits/master)gsellgsellhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/44unknown variable in 'Kick-Test-1.in'2017-08-05T20:03:17+02:00gsellunknown variable in 'Kick-Test-1.in'```
Error> *** in line 109 of file "Kick-Test-1.in" at end of statement:
Error>
Error> *** User error detected by function "SRefExpr::fill()"
Error> Evaluating expression "{DRIFT_BEFORE_KICK,DRIFT_AFTER_KICK,KICK_ANGLE,KICK_LENGTH}
...```
Error> *** in line 109 of file "Kick-Test-1.in" at end of statement:
Error>
Error> *** User error detected by function "SRefExpr::fill()"
Error> Evaluating expression "{DRIFT_BEFORE_KICK,DRIFT_AFTER_KICK,KICK_ANGLE,KICK_LENGTH}
Error> The <variable> "KICK_ANGLE" is unknown.
```OPAL 1.6.0adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/43unknown variable in 'ExternalFieldTest'2017-08-05T19:53:38+02:00gsellunknown variable in 'ExternalFieldTest'```
Error{0}> *** in line 42 of file "ExternalFieldTest.in" at end of statement:
Error{0}>
Error{0}> *** Parse error detected by function "SRefExpr::fill()"
Error{0}>
Error{0}> The <variable> "FINLB02_RAC_LAG" is unknown.
``````
Error{0}> *** in line 42 of file "ExternalFieldTest.in" at end of statement:
Error{0}>
Error{0}> *** Parse error detected by function "SRefExpr::fill()"
Error{0}>
Error{0}> The <variable> "FINLB02_RAC_LAG" is unknown.
```OPAL 1.6.0adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/42Unknown variable in test BeamLine-2.in2017-08-05T15:35:54+02:00gsellUnknown variable in test BeamLine-2.in```
Error> *** in line 29 of file "BeamLine-2.in" before token ",":
Error>
Error> *** Parse error detected by function "SRefExpr::fill()"
Error>
Error> The <variable> "F" is unknown.
``````
Error> *** in line 29 of file "BeamLine-2.in" before token ",":
Error>
Error> *** Parse error detected by function "SRefExpr::fill()"
Error>
Error> The <variable> "F" is unknown.
```adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/40Regression Test are not running after commit to src2019-05-06T16:28:58+02:00adelmannRegression Test are not running after commit to src![IMG_0068](/uploads/3d85ada3a631b785258b333b72936676/IMG_0068.PNG)![IMG_0068](/uploads/3d85ada3a631b785258b333b72936676/IMG_0068.PNG)OPAL 1.6.0gsellgsellhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/39WIP: Disabled Regression Tests2018-04-01T15:03:17+02:00adelmannWIP: Disabled Regression TestsNeed to check if these tests are still be used and/or are redundant
Degrader-2
HKick-Test-2
LaserEmission-1
PROSCAN-3
PROSCAN-4
ParallelPlateFurman1
ParallelPlateVaughan1Need to check if these tests are still be used and/or are redundant
Degrader-2
HKick-Test-2
LaserEmission-1
PROSCAN-3
PROSCAN-4
ParallelPlateFurman1
ParallelPlateVaughan1OPAL 1.9.xadelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/38Degrader-1 regression test - DKS2020-05-01T10:10:46+02:00Uldis LocansDegrader-1 regression test - DKSDegrader-1 test might fail using the DKS version due to a different random number sequence used on the GPU. The impact of the random number sequence on the final energy can be few keW (saw up to 29 keV on the CPU with different SEED). I ...Degrader-1 test might fail using the DKS version due to a different random number sequence used on the GPU. The impact of the random number sequence on the final energy can be few keW (saw up to 29 keV on the CPU with different SEED). I believe the test if fine, but for it to pass we need either a separate reference for the GPU version, where we can guarantee the same random number sequence or we need to adjust the tolerance for Ekin (its 0.001 keV at the moment)
The CPU tests are also passing/failing even if the seed is kept the same. With the same seed on the CPU I sometimes see up to 0.2 keV difference in Ekin from the reference. I'm not sure what is the reason for this difference since the random number sequence in the CollimatorPhysics should be the same in this case.OPAL 1.9.xhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/37DKS2019-05-06T16:28:58+02:00adelmannDKScurrent results from the regression tests are available at
--------------
http://amas.web.psi.ch/opal/regressionTests/OPAL-1.6/
OPAL compiled *without* DKS. Three tests are failing:
2.5.2017 [passed:201 | broken:0 | failed:3 | total:2...current results from the regression tests are available at
--------------
http://amas.web.psi.ch/opal/regressionTests/OPAL-1.6/
OPAL compiled *without* DKS. Three tests are failing:
2.5.2017 [passed:201 | broken:0 | failed:3 | total:204]
--------------
http://amas.web.psi.ch/opal/regressionTests/OPAL-1.6-DKS/
OPAL compiled *with* DKS but DKS is *not* used. Two tests are failing:
2.5.2017 [passed:202 | broken:0 | failed:2 | total:204]
Note: The results shouldn't depend on whether OPAL has been compiled with or without DKS support.
---------------
http://amas.web.psi.ch/opal/regressionTests/OPAL-1.6-DKS-USED/
OPAL compiled *with* DKS and DKS *is* used. Five tests are failing:
2.5.2017 [passed:193 | broken:6 | failed:5 | total:204]
----------------
In all three flavours the following tests are skipped (same as in the "old" tests"):
Degrader-2
HKick-Test-2
LaserEmission-1
PROSCAN-3
PROSCAN-4
ParallelPlateFurman1
ParallelPlateVaughan1
----------------
Following error occurs in 'OpalRingTest':
Found valid test in ./OpalRingTest
Checksum for reference OpalRingTest.stat: OK
Checksum for reference OpalRingTest.out: OK
Checksum for reference OpalRingTest.lbal: OK
Checksum for reference PROBE1.loss: OK
run simulation
Error: failed to parse OpalRingTest.rt file line 2
PROBE1.loss "x" all 1E-15
Python reports
[Errno 2] No such file or directory: 'PROBE1.loss'
Error: failed to parse OpalRingTest.rt file line 3
PROBE1.loss "y" all 1E-15
Python reports
[Errno 2] No such file or directory: 'PROBE1.loss'OPAL 1.6.0https://gitlab.psi.ch/OPAL/regression-tests/-/issues/36'RestartTest-6' and 'RestartTest-6.2' fail with not enough simulation particl...2017-07-10T07:47:48+02:00gsell'RestartTest-6' and 'RestartTest-6.2' fail with not enough simulation particles error```
Ippl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Panik: The number of simulation particles is smaller tha...```
Ippl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Panik: The number of simulation particles is smaller than the number of gridpoints
Ippl{0}>
OPAL{0}> * End of input stream "RestartTest-6.in".
```OPAL 1.6.0adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/35'RestartTest-5': not enough simulation particles2017-07-10T07:47:48+02:00gsell'RestartTest-5': not enough simulation particlesIppl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Panik: The number of simulation particles is smaller than the n...Ippl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Panik: The number of simulation particles is smaller than the number of gridpoints
Ippl{0}>
OPAL{0}> * End of input stream "RestartTest-5.in".adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/34'RestartTest-4': not enough simulation particles2017-07-10T07:47:49+02:00gsell'RestartTest-4': not enough simulation particles```
Ippl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Panik: The number of simulation particles is smaller than t...```
Ippl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Panik: The number of simulation particles is smaller than the number of gridpoints
```OPAL 1.6.0adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/33'RestartTest-3': not enough simulation particles2017-07-10T07:47:49+02:00gsell'RestartTest-3': not enough simulation particles```
Ippl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Panik: The number of simulation particles is smaller tha...```
Ippl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Panik: The number of simulation particles is smaller than the number of gridpoints
```adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/32'RestartTest-1': not enough simulation particles2017-07-10T07:47:49+02:00gsell'RestartTest-1': not enough simulation particlesThe test `RestartTest-1`fails with the following error:
```
Ippl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Pan...The test `RestartTest-1`fails with the following error:
```
Ippl{0}> *** User error detected by function "TrackRun::setupFieldsolver()"
Ippl{0}> RUN,METHOD="PARALLEL-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl{0}> Panik: The number of simulation particles is smaller than the number of gridpoints
```OPAL 1.6.0adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/31parse error in 'OpalRingTest'2017-07-10T07:47:49+02:00gsellparse error in 'OpalRingTest'The test `OpalRingTest`fails with a parse error:
```
Error> *** in line 52 of file "OpalRingTest.in":
Error> *** in line 53 of file "OpalRingTest.in" before token ",":
Ippl>
Ippl> *** Parse error detected by function "OpalParser::parse...The test `OpalRingTest`fails with a parse error:
```
Error> *** in line 52 of file "OpalRingTest.in":
Error> *** in line 53 of file "OpalRingTest.in" before token ",":
Ippl>
Ippl> *** Parse error detected by function "OpalParser::parse()"
Ippl> RUN,METHOD="CYCLOTRON-T",BEAM=BEAM1,FIELDSOLVER=FS1,DISTRIBUTION=DIST1;
Ippl> Syntax error, the command 'RUN' could belong to
Ippl> - the command TRACK
Ippl> but it's not present!
Ippl>
```OPAL 1.6.0adelmannadelmannhttps://gitlab.psi.ch/OPAL/regression-tests/-/issues/30'Envelope-Tracker-Phase1' fails while paring input file2017-07-10T07:47:49+02:00gsell'Envelope-Tracker-Phase1' fails while paring input fileThe test 'Envelope-Tracker-Phase1' fails with a parse error:
```
Error{3}>
Error{3}> *** Parse error detected by function "Line::parseList()"
Error{3}> *** in line 25 of file "Envelope-Tracker-Phase1.in" before token ")":
Error{3}> ...The test 'Envelope-Tracker-Phase1' fails with a parse error:
```
Error{3}>
Error{3}> *** Parse error detected by function "Line::parseList()"
Error{3}> *** in line 25 of file "Envelope-Tracker-Phase1.in" before token ")":
Error{3}> L1:LINE=(FINSS_RGUN,FIND1_MSOL10,END);
Error{3}> Element "END" is undefined.
Error{3}>
Error{2}>
Error{2}> *** Parse error detected by function "Line::parseList()"
Error{2}> *** in line 25 of file "Envelope-Tracker-Phase1.in" before token ")":
Error{2}> L1:LINE=(FINSS_RGUN,FIND1_MSOL10,END);
Error{2}> Element "END" is undefined.
Error{2}>
```OPAL 1.6.0adelmannadelmann