### manual edit and replace nicefrac

parent 0747bf0b
 ... ... @@ -172,7 +172,7 @@ pole faces. Figure~\ref{rbend} shows an \texttt{RBEND} with a positive bend angl \item[ANGLE] Bend angle (radians). Field amplitude of bend will be adjusted to achieve this angle. (Note that for an \texttt{RBEND}, the bend angle must be less than $\nicefrac{\pi}{2} + E1$, where \texttt{E1} is the entrance edge angle.) an \texttt{RBEND}, the bend angle must be less than $\frac{\pi}{2} + E1$, where \texttt{E1} is the entrance edge angle.) \item[K0] Field amplitude in y direction (Tesla). If the \texttt{ANGLE} attribute is set, \texttt{K0} is ignored. ... ... @@ -220,7 +220,7 @@ pole faces. Figure~\ref{rbend} shows an \texttt{RBEND3D} with a positive bend an \item[ANGLE] Bend angle (radians). Field amplitude of bend will be adjusted to achieve this angle. (Note that for an \texttt{RBEND3D}, the bend angle must be less than $\nicefrac{\pi}{2} + E1$, where \texttt{E1} is the entrance edge angle.) an \texttt{RBEND3D}, the bend angle must be less than $\frac{\pi}{2} + E1$, where \texttt{E1} is the entrance edge angle.) \item[K0] Field amplitude in y direction (Tesla). If the \texttt{ANGLE} attribute is set, \texttt{K0} is ignored. ... ...
 ... ... @@ -292,7 +292,6 @@ This file is used to log the statistical properties of the bunch in the ASCII va 29 & ypy & 1 & Correlation between y-components of positions and momenta\\ 40 & zpz & 1 & Correlation between s-components of positions and momenta\\ \end{tabular} \end{center} \subsection*{\textit{data/\textless input\_file\_name \textgreater\_3D.opal}} \textit{OPAL-t} copies the input file into this file and replaces all occurrences of \texttt{ELEMEDGE} with the corresponding position using \texttt{X}, \texttt{Y}, \texttt{Z}, \texttt{THETA}, \texttt{PHI} and \texttt{PSI}. ... ... @@ -318,16 +317,16 @@ The following arguments can be passed \subsection*{\textit{data/\textless input\_file\_name \textgreater\_ElementPositions.stat}} This file can be used when plotting the statistics of the bunch to indicate the positions of the magnets. It is written in the SDDS format. The information that is written can be found in the following table. \begin{tabular} \begin{tabular}{|l|l|l|l|} \caption{Information stored in the file \textit{\textless input\_file\_name \textgreater\_ElementPositions.stat}}\\ \hline \tabhead Column Nr. & Name & Units & Meaning \\ \hline 1 & s & {m} & The position in path length\\ 2 & dipole & \nicefrac{1}{3} & Whether the field of a dipole is present\\ 2 & dipole & \frac{1}{3} & Whether the field of a dipole is present\\ 3 & quadrupole & 1 & Whether the field of a quadrupole is present\\ 4 & sextupole & \nicefrac{1}{2} & Whether the field of a sextupole is present\\ 5 & octupole & \nicefrac{1}{4} & Whether the field of a octupole is present\\ 4 & sextupole & \frac{1}{2} & Whether the field of a sextupole is present\\ 5 & octupole & \frac{1}{4} & Whether the field of a octupole is present\\ 6 & decapole & 1 & Whether the field of a decapole is present\\ 7 & multipole & 1 & Whether the field of a general multipole is present\\ 8 & solenoid & 1 & Whether the field of a solenoid is present\\ ... ... @@ -360,7 +359,6 @@ The trajectory of the reference particle is stored in this ASCII file. The conte 14 & {MeV} & Kinetic energy\\ 15 & {s} & Time\\ \end{tabular} \end{center} \section{Multiple Species} In the present version only one particle species can be defined see~Chapter~\ref{beam}, however ... ...
 ... ... @@ -214,7 +214,7 @@ Figure~\ref{cyclParameters,cyclphasespace} are simulation results, shown by H5R From the view of numerical simulation, the difference between Injector II and Ring cyclotron comes from two aspects: \begin{description} \item[B Field] The structure of Ring is totally symmetric, the field on median plain is periodic along azimuthal direction, \textit{OPAL-cycl} take this advantage to only store \nicefrac{1}{8} field data to save memory. along azimuthal direction, \textit{OPAL-cycl} take this advantage to only store \frac{1}{8} field data to save memory. \item[RF Cavity] In the Ring, all the cavities are typically single gap with some parallel displacement from its radial position.\textit{OPAL-cycl} have an argument \texttt{PDIS} to manipulate this issue. ... ...
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!