... | ... | @@ -152,7 +152,7 @@ dude:foo adelmann$ ls foo_EDES=0.05:0.25:0.05 |
|
|
|
|
|
dude:foo adelmann$ ls
|
|
|
|
|
|
fieldmaps foo.data ** foo_EDES=0.05:0.25:0.05_POS1=0.4:0.5:0.01** setup.sh tmpl
|
|
|
fieldmaps foo.data **foo_EDES=0.05:0.25:0.05_POS1=0.4:0.5:0.01** setup.sh tmpl
|
|
|
|
|
|
|
|
|
dude:foo adelmann$ ls foo_EDES=0.05:0.25:0.05_POS1=0.4:0.5:0.01
|
... | ... | @@ -164,25 +164,19 @@ fooEDES=0.05POS1=0.43 fooEDES=0.05POS1=0.48 fooEDES=0.15POS1=0.43 fooEDES= |
|
|
fooEDES=0.05POS1=0.44 fooEDES=0.05POS1=0.49 fooEDES=0.15POS1=0.44 fooEDES=0.15POS1=0.49 fooEDES=0.1POS1=0.44 fooEDES=0.1POS1=0.49 fooEDES=0.25POS1=0.44 fooEDES=0.25POS1=0.49 fooEDES=0.2POS1=0.44 fooEDES=0.2POS1=0.49**
|
|
|
|
|
|
|
|
|
== Run a Restart ==
|
|
|
#Run a Restart (needs to be updated)
|
|
|
|
|
|
In this particular example we assume that a simulation called ''Phase3'' has successfully been executed. The output of the simulation is located
|
|
|
|
|
|
at */gpfs/homefelsim/adelmann/Phase3/FinPhase3/*.
|
|
|
|
|
|
A restart simulation starting from ''step=10'' until ''ZSTOP=13.1'' m would then look like:
|
|
|
|
|
|
*
|
|
|
runOPAL.py --restart-file=/gpfs/homefelsim/adelmann/Phase3/FinPhase3/FinPhase3.h5 --restart-step=10 ZSTOP=13.1
|
|
|
*
|
|
|
|
|
|
`runOPAL.py --restart-file=/gpfs/homefelsim/adelmann/Phase3/FinPhase3/FinPhase3.h5 --restart-step=10 ZSTOP=13.1`
|
|
|
|
|
|
In this example instead of a restart step, a restart position is specified.
|
|
|
|
|
|
*
|
|
|
runOPAL.py --restart-file=/gpfs/homefelsim/adelmann/Phase3/FinPhase3/FinPhase3.h5 --restart-pos=10.0 ZSTOP=13.1
|
|
|
*
|
|
|
`runOPAL.py --restart-file=/gpfs/homefelsim/adelmann/Phase3/FinPhase3/FinPhase3.h5 --restart-pos=10.0 ZSTOP=13.1`
|
|
|
|
|
|
If there exists no phase space dump at the specified position (10.0 meters here), the nearest position will be located and used.
|
|
|
|
|
|
|
|
|
== CAVE: At the moment restart is only possible from the last step dumped in the .h5 file. Also, be careful to use the number of dumps with --restart-step, not the actual number of steps (i.e. if in the original run you used PSDUMPFREQU = 10, you will get 10 dumps per 100 steps. to restart from STEP 100 you will write --restart-step=10). |
|
|
\ No newline at end of file |
|
|
If there exists no phase space dump at the specified position (10.0 meters here), the nearest position will be located and used. |