maloja.py

@@ -11,17 +11,16 @@ from slic.core.adjustable import Adjustable, PVAdjustable, DummyAdjustable
 from slic.core.acquisition import SFAcquisition#, PVAcquisition
 from slic.core.condition import PVCondition
 from slic.core.scanner import Scanner
-from slic.devices.simpledevice import SimpleDevice
 from slic.devices.general.motor import Motor
 from slic.devices.general.delay_stage import DelayStage
 from slic.devices.general.smaract import SmarActAxis
+from slic.devices.general.shutter import Shutter
 from slic.utils import devices, Marker, as_shortcut
 #from slic.utils import Channels, Config, Elog, Screenshot, PV
 #from slic.core.acquisition.fakeacquisition import FakeAcquisition
 
 from devices.attenuator import Attenuator
 from devices.undulator import Undulators, TwoColorChicane, Phases
-from devices.magnet import Magnet
 
 from channels import channels, pvs, detectors
 from spreadsheet import overview, print_overview, print_line_for_spreadsheet
@@ -30,6 +29,10 @@ import colors
 
 dummy = DummyAdjustable(units="au")
 
+#gas_attenuator = PVAdjustable("SATFE10-VVRE054-A010:SET_VAL-UI", name="Gas Attenuator")
+
+gas_attenuator = PVAdjustable("SATFE10-VVRE054-A010:SET_VAL-UI", process_time=20, name="Gas Attenuator")
+
 #jet_delay = PVAdjustable("SATES20-CVME-EVR0:Pul6-Delay-SP", "SATES20-CVME-EVR0:Pul6-Delay-RB", accuracy=1, name="Jet Delay")
 
 source_delay = PVAdjustable("SATES20-CVME-EVR0:Pul14-Delay-SP", "SATES20-CVME-EVR0:Pul14-Delay-RB", accuracy=1, name="Source Delay")
@@ -64,11 +67,13 @@ xota_z_trans = Motor("SATES21-XOTA166:W_Z",     name="Table 1: Z coordinated")
 xota_y_trans = Motor("SATES21-XOTA166:W_Y",     name="Table 1: Y coordinated")
 #xota_hori_z  = Motor("SATES21-XOTA166:MOTOR_Z", name="Table 1: Z raw")
 
-mot1_x = SmarActAxis("SATES21-XSMA166:MOT4", name="Table 1: sma X")
-mot1_y = SmarActAxis("SATES21-XSMA166:MOT5", name="Table 1: sma Y")
-mot1_z = SmarActAxis("SATES21-XSMA166:MOT6", name="Table 1: sma Z")
+#mot1_x = SmarActAxis("SATES21-XSMA166:MOT4", name="Table 1: sma X")
+#mot1_y = SmarActAxis("SATES21-XSMA166:MOT5", name="Table 1: sma Y")
+#mot1_z = SmarActAxis("SATES21-XSMA166:MOT6", name="Table 1: sma Z")
 
-mot3_z = SmarActAxis("SATES23-XSMA169:MOT3", name="Table 3: sma Z")
+#mot3_z = SmarActAxis("SATES23-XSMA169:MOT3", name="Table 3: sma Z")
+mot3_x = SmarActAxis("SATES23-XSMA169:MOT7", name="Table 3: sma x")
+mot3_y = SmarActAxis("SATES23-XSMA169:MOT8", name="Table 3: sma y")
 
 
 standa = Motor("SLAAT21-LMOT-M707:MOT", name="Standa Motor")
@@ -78,19 +83,19 @@ mark_gascell    = Marker(standa,  88.334, "Gas Cell")
 mark_tof        = Marker(standa,  28.330, "TOF")
 
 
-magn = PV("SATUN14-MBND100:CYCLE")
+#magn = PV("SATUN14-MBND100:CYCLE")
 
-@as_shortcut
-def cycle_magnet():
-    magn.put(1, wait=True)
-    for _ in trange(250):
-        sleep(1)
-    # set the current to 1 and 5 consecutively,
-    # since the results after the first step always looks strange
-    chic_delay.set(1).wait()
-    sleep(1)
-    chic_delay.set(5).wait()
-    sleep(1)
+#@as_shortcut
+#def cycle_magnet():
+#    magn.put(1, wait=True)
+#    for _ in trange(250):
+#        sleep(1)
+#    # set the current to 1 and 5 consecutively,
+#    # since the results after the first step always looks strange
+#    chic_delay.set(1).wait()
+#    sleep(1)
+#    chic_delay.set(5).wait()
+#    sleep(1)
 
 
 # add some more devices to the overview
@@ -118,8 +123,10 @@ instrument = "maloja"
 #pgroup = "p19509" # slic dev
 #pgroup = "p19743" # Focus tests and timing tests
 #pgroup = "p19582" # pilot 3 -- SPI
-pgroup = "p19583" # permalloy 2.0
+#pgroup = "p19583" # permalloy 2.0
 #pgroup = "p20073" # alvise
+#pgroup = "p20194" # TOF beamtime heated valve
+pgroup = "p20276" # COLTRIMS commissioning
 
 daq = SFAcquisition(instrument, pgroup, default_channels=channels, default_pvs=pvs, default_detectors=detectors, rate_multiplicator=1, append_user_tag_to_data_dir=True)
 #daq = FakeAcquisition(instrument, pgroup)
@@ -131,7 +138,7 @@ check_intensity = PVCondition("SATBD01-DBPM060:Q2", vmin=5, vmax=None, wait_time
 
 scan = Scanner(scan_info_dir=f"/sf/{instrument}/data/{pgroup}/res/scan_info", default_acquisitions=[daq], condition=check_intensity)
 
-gui = GUI(scan, show_goto=True, show_spec=True)
+gui = GUI(scan, show_goto=True, show_spec=True, show_run=True)
 
 
 

overnight.py

@@ -1150,3 +1150,57 @@ def focus_test(daq):
 
 
 
+
+from devices.simone import Magnet, Frequency
+
+from itertools import count
+from time import sleep
+
+magnet = Magnet()
+freq = Frequency()
+shutter = Shutter("SATOP21-OPSH138")
+
+def overnight():
+
+    pos_ref = -0.30145 #-0.857
+    pos_sig = -0.9516
+
+    for ii in range(1,4):
+
+        freq.set(ii)
+
+        frequency = 6.2832+0.1428*ii #6.2832 #GHz
+
+        delays1 = [ 0, 5/8,  1/8, 7/8]
+        delays2 = [3/8,  2/8, 6/8, 4/8]
+
+        n_pulses = 1000
+        Emin, Emax, Edelta = 708, 720, 2
+
+        for i in range(12):
+        #for i in count():
+            shutter.close()
+            mot3_x.set(pos_ref)
+            sleep(1)
+            shutter.open()
+            sleep(1)
+
+            magnet.set(0)
+            print("delay:", magnet)
+            scan.scan1D(und, Emin, Emax, Edelta, n_pulses, f"evening02_ref_{frequency}_{i:04}", return_to_initial_values=False)
+
+            shutter.close()
+            mot3_x.set(pos_sig)
+            sleep(1)
+            shutter.open()
+
+            for delay in delays1:
+                magnet.set(delay/frequency*1000)
+                print("delay:", magnet)
+                scan.scan1D(und, Emin, Emax, Edelta, n_pulses, f"evening02_sig_{frequency}_{i:04}_{delay}", return_to_initial_values=False)
+            delays1, delays2 = delays2, delays1
+
+        #shutter.open()
+
+
+