issue with hkl calculations
Created by: cblarsen1
I think I've found an issue with the hkl calculations in the hdf viewer.
We have just collected 2D data sets with nuclear peaks, but when I hover over the peaks in pyzebra after pressing hkl calculate I don't get hkl values that are approximately integers. I tried to load the exact same .cami file (so ub matrix, detector distance, lambda, etc should be the same) in CAMI4PSD and I don't have the same issue.
I have attached two pictures of the same frame viewed in pyzebra and CAMI4PSD. pyzebra calculates hkl = -2.729 1.562 2.312 and CAMI4PSD calculates hkl = -2.989 0.995 -0.040 for the same peak.
Am I doing something wrong, or is pyzebra maybe reading some detector parameters incorrectly from the .cami file? For reference this is proposal id 20211324, file 2554, frame 13.
Activity
Created by: ivan-usov
Thanks for posting this issue, @cblarsen1 !
My first guess would be that some parameter was redefined in .cami file, which is then understood by CAMI4PSD software, while pyzebra doesn't read any of the parameters from .cami at all (even the suggestion was that .cami files won't be used in the future). So, the only information pyzebra takes from .cami is the location of hdf files, and nothing else. Do you think that this is the case here?
Created by: ivan-usov
In fact, I see thatOK, I checked it better, and seems thatnu = -2.68in CAMI4PSD, andnu = -3.154in pyzebra hdf viewer. Probably, this is the cause of the problem.nuis changing within that range along the peak.Still, I think it's very probable, that .cami redefined a value for some parameter (
wave,ddist,ubetc.), which is currently not supported in pyzebra.Created by: zaharko
Dear Both,
I looked the problem. Pyzebra make correct calculations from the meta-data written in the hdf file.
The problem is, however, that it is not alway correct what is stored in the hdf file. In the case which Camilla brought up the UB matrix was wrong.
This brings us to a 2nd problem which Pyzebra has - It does not show what are the metadata in hdf file and does not allow to change them.
Ivan, can we discuss how to implement this?
Oksana
On 21 Jun 2021, at 14:17, Ivan Usov @.@.>> wrote:
In fact, I see that nu = -2.68 in CAMI4PSD, and nu = -3.154 in pyzebra hdf viewer. Probably, this is the cause of the problem.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHubhttps://github.com/paulscherrerinstitute/pyzebra/issues/31#issuecomment-864986477, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AMBMFVE47BPD5KDF423VITLTT4UUXANCNFSM47BKUMBQ.
[ { @.": "http://schema.org", @.": "EmailMessage", "potentialAction": { @.": "ViewAction", "target": "https://github.com/paulscherrerinstitute/pyzebra/issues/31#issuecomment-864986477", "url": "https://github.com/paulscherrerinstitute/pyzebra/issues/31#issuecomment-864986477", "name": "View Issue" }, "description": "View this Issue on GitHub", "publisher": { @.": "Organization", "name": "GitHub", "url": "https://github.com" } } ]
Created by: ivan-usov
@zaharko , just now I pushed a change to the test server that will make (only) UB matrix from .cami file to affect hkl values in (only) "hdf_viewer". Opening an hdf file via a Proposal ID obviously won't update UB matrix, since there is no .cami file involved in that case.
Not sure if this is ideal, since you wanted to avoid .cami files in the future, so I'm completely in favor of further discussion on how to handle it better.
