Code indexing in gitaly is broken and leads to code not being visible to the user. We work on the issue with highest priority.

Skip to content
Snippets Groups Projects

Changes

Page history
  • New page
  • Templates
    • Update Jungfrau authored by morill_a's avatar morill_a
    Hide whitespace changes
    Inline Side-by-side
    How-to-run-things-at-Maloja/Jungfrau.md
    View page @ 86b3fc03
    ......@@ -35,24 +35,31 @@ Click on power on.
    3.2 Wait for 2-3 minutes
    4. If all worked go to : http://sf-daq-maloja:5015/ This should open the control window:
    4. If all worked go to : http://sf-daq-maloja:5015/ This should open the control window and click on connect (blue button):
    ![Screenshot_from_2022-03-02_11-30-07](uploads/73a328de9ace0ff9761ba9fbec422200/Screenshot_from_2022-03-02_11-30-07.png)
    5. To take a new pedestal (background):
    The button should change to green color and say receiving. If it says polling and remains in orange it is not connecting.
    Before 12/2023:
    A possible reason is that the transceivers are not well plugged in the switch (in the rak) or that any of the optical fibers are not clean. If that is the case, when trying to run a scan we would get an error like: "Error, reason: everything fine but no request to write any data". Which means that the data of any of the modules or the pulse IDs are not being properly received.
    5.1 In run control, go to "Config" and press "Configure"
    5. In run control, go to "Config" and press "Configure".
    5.2 In the pop-up window: click JF.... detector
    In the pop-up window: click JF.... detector.
    5.3 Go to "Expert" panel, click "Take Pedestal" then Run
    ![Screenshot_from_2023-01-26_15-36-26](uploads/0d2e9bf73d045e542a121e1577b54bb9/Screenshot_from_2023-01-26_15-36-26.png)
    6. To take a new pedestal (background):
    Before 12/2023: Go to "Expert" panel, click "Take Pedestal" then Run.
    After 12/2023 we can take it directly in slic:
    From 12/2023 we can take it directly in slic:
    ![Screenshot_from_2022-12-07_08-03-34](uploads/10fd9bd2bb69b070c270cc20fa4c923e/Screenshot_from_2022-12-07_08-03-34.png)
    Note: If we do not have the detector selected we would get the following error: "Error(pedestal procedure), reason : no detectors defined"
    ### Live analysis panel (SPI)
    Start the browser and go to http://sf-cn-15:5515. A winodow like this should appear:
    ......@@ -89,11 +96,6 @@ Example of realistic values in the screen (from Pilot 3):
    We can open several auxiliary windows in the menu to the left of the "Receiving" button such as (normalised) ROI intensities as a function of time (also available at "http://sf-cn-15:5515/roi_intensities") or the Hit rate ("https://sf-cn-15:5515/hitrate"). To remove history, use "reset" button there.
    Error, reason : everything fine but no request to write any data
    Error(pedestal procedure), reason : no detectors defined
    ![Screenshot_from_2023-01-26_15-36-26](uploads/0d2e9bf73d045e542a121e1577b54bb9/Screenshot_from_2023-01-26_15-36-26.png)
    ### Changing to low noise mode
    On the Maloja console type:
    ......